Sequences

The ignition in sequence of fireworks (Roman candles, shells, italians) is the main tool in the creation of the finest pyrotechnic choreography.

Piroshow allows the programming and the execution of pyrotechnical sequences through two distinct ways: Slave 30CH100V and Master FullPower for very long sequences (unlimited switching devices) and complex (articulated in different firing positions).

Piroshow modules allow easy programming of sequences:

Constant: the pyrotecnician must only decide the time interval between a switch and the other, and the number of channels to apply the sequential programming.

Accelerated: the pyrotecnician set the initial interval (longer) and end (shortest) and the number of channels, the Piroshow module automatically apply between the firing of one channel and the other intervals faster and faster.

Decelerated: the pyrotecnician set the initial interval (shorter) and final (longest) and the number of channels, the Piroshow module automatically apply between the firing of one channel and the other intervals slower and slower.

NOTE: to ease of programming sequences, Piroshow modules offer the possibility of SIMULATED SEQUENCE:

once programmed the sequence (constant acceleration, deceleration), the pyrotecnician can follow the simulation of the final effect of programming directly in the Piroshow modul both visually, through the sequential switching of LEDs for each channel, both in sound, through the beeps associated to every ignition of the sequence.

MAXIMUM EASE IN PROGRAMMING!