Master FullPower

Piroshow has always been involved in the research of innovative and professional solutions to surprise their customers. Master modules are the max expression of this research: a unique product to manage an entire pyrotechnical show, synchronizing lights, audio, and fireworks!

Firing Module Master FullPower is all this and not only.

All firing functions remain unchanged, you will be able to execute the show in automatic, semi-automatic o manual mode. Also to create, modify and execute pyromusical shows, synchronize in their execution to external audio service, control and manage lights, flames (electro valves) and all the illumination and the stage effects.

Master FullPower adds the direct alimentation of 126 modules between SmartSlaves, FastSlaves creating a new ignition system that is versatile, light, and simple to use. SmartSlave and FastSlave are the new generations firing devices: without internal batteries, guarantee high performances and reliability even if they are small size, comfortable to transport, and simple to use. Combining two products with these characteristics allows having the excellence of the firing system.

UPDATE TO THE 2021 VERSION AVAILABLE (Cost € 600): Software update, introduction of new features such as: offset, FSK, speed, lock / unlock of an ID during the firing phase, etc. Hardware upgrade: audio and DMX input / output isolation, RF shielding and audio amplifier. Valid for all customers who own a Master FullPower in previous versions.

The SMPTE input also allows to connect two or more Masters together to perform the same show: the system configured in this way is NO LIMITS! The number of Slaves and the number of ignitions that can be managed will depend only on the number of Full Masters connected.

In the new Master FullPower a new RCA type SMPTE input has been added because it is more common in use.

DC Input

The Direct Current input is the connector where you connect the battery charger to feed the Master FullPower. In case of emergency, to this input, you can connect an external power source, like a simple battery, able to provide the energy necessary for the success of the whole show.

Master FullPower has got a 12V battery that allows to feed up to 126 SmartSlave or FastSlave, this capacity is also supported by the new fast charger we will send you.

Master FullPower recharges in less than three hours!

At the same time, Master FullPower not only guarantees reliability at the highest levels but it has been designed to allow the pyrotechnician to recognize his own mistakes made during the design of the show, as well as during the positioning phase: Master FullPower in fact allows test all the Slave modules used in the performance of the show and the igniters connected to them. Its large screen allows you to view in a single view all the system used at the time and it’s simple white, red, blue, and green boxes to recognize and correct any mistakes made in advance.

From the Master FullPower is also possible to control the charge status of all the modules Slave 30CHs connected and put the system on stand-by once completed the test phase and then wake-up it to the execution with a simple click.

From the ID PROGRAM button, you can modify the identity of the SmartSlaves and SuperSlaves without using the ID programmer for each one.

The Firing Module Master FullPower gives the maximum flexibility in the planning and design of the shows:

Traditional shows:

• design directly in local, through the touch-screen control panel, by accessing the specific Create Show menu.
• import of the already definitive project (list), developed in the pyrotechnic simulator, through a USB pen-drive. The imported show will be saved in the internal memory and then executed. The show can also be modified: elimination of pyrotechnic passages or their replacement with different ones.
• modification of ignition times – addition of further ignitions – addition of lighting effects or stage effects directly in the Master through the Edit Show item.

Pyromusical shows:

• import of music tracks, in .mp3 or .wav format through the USB port and subsequent association to a firing list already present in the Master memory or design of the show list directly in the Master FullPower module through the control panel.
• importation of the music files and the firing list developed in the simulator through the USB input, synchronization through the control panel of the Master FullPower.

Shows with light effect or other stage effects:

• importation of the definitive project of the show, traditional or pyromusical, with the presence of stage effects and electro valves (flames) already planned in the simulator. Management of the lights effects or every other stage effect through DMX port.
• addition of stage effects to a show already memorized through the Edit Show menu or creation directly in the Master of a show with a simultaneous performance of stage effects through the Create Show menu.

Firing Mode:

Manual

Firstly, manual mode is to be used in absence of programming the show. Connecting the Slave to Master Full, by cable or RadioModem, the pyrotechnic will select, according to which is the progressive order of the show, the line, the slave, and the channel to be ignited pressing the FIRE button. Master Full predisposes for ignition always the channel after last executed, even in the case of jumping between different lines or different slave modules. A simple, but of great help, feature for the pyrotechnic because it speeds up the selection of the correct firing channel and prevents the possibility of running the wrong channel.

Automatic

Secondly, in automatic mode the project of the show programmed directly into the Master Full module or imported from the simulator via USB drive, is complete with all of its times including breaks and interruptions between a block of ignition and/or music tracks and another. It will be sufficient to press once the shoot button and follow the proper execution on the display.

Semiautomatic

Thirdly, the semiautomatic mode is selected when the show is scheduled in its list of ignition timing, but the pyrotechnic wants to reserve the opportunity to personally choose how and when to actually run the various blocks in which the show is ordered. In this mode, the time signature of the next shot provides an important aid to the previous one. The semiautomatic mode is realized by inserting from the “Create show” or ” Edit show” a pause (short pause) between a programmed block of ignitions and the other. The ignition of each subsequent block involves a new click on the FIRE button.

Via Time Code

After all, ignition via TIME CODE, an extraordinary innovation of Piroshow. It allows synchronizing the list planned on the Master with all external devices connected to it Its clock regulates all planned activities of all connected devices. The Time Code technology allows in this way to launch with a single click all instruments present in the run of the show. In the case ex. of pyrotechnic shows where audio is performed by external services or highly complex shows with light effects committed to specialized companies, Time Code ensures the perfect execution.

The Master Full carrying case and transport case is made of a special plastic polymer that guarantees impact resistance and extremely high-intensity use, according to what we might call “military” standards. It is also waterproof and equipped with a valve for checking internal pressure. It does not fear the use even in the most difficult weather conditions.